Muratec MFX-1300 Field Engineering Manual page 35

Machine Parameter A:3
Initial
Switch
Setting
7 * Leading edge document
margin adjustment
6 *
(ADF)
5 *
4 *
Adjusts the leading edge
3 *
margin from Document
2 *
Sensor 2 (DS2) to the start of
1 *
the scanning position.
0 *
Each setting changes
by 0.847mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Machine Parameter A:4
Initial
Switch
Setting
7 * Trailing edge document
margin adjustment.
6 *
(ADF)
5 *
4 *
Adjusts the document feed
3 *
after the trailing edge of a
2 *
document passes
1 *
Document Sensor 2 (DS2).
0 *
Each setting changes
by 0.847mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Machine Parameter A:5 and A:6 --- Factory use only
Adjust
Switch 76543210
Adjust
Switch 76543210
3-5
Usage/Comments
Settings
00000000 0.00 mm
00000001 0.847 mm
00000010 1.694 mm
00110100 44.044 mm
(MFX-1700/MFX-1600)
00111110 52.514 mm
(MFX-1300/MFX-1200)
11111110 215.138 mm
11111111 215.985 mm
Usage/Comments
Settings
00000000 0.00 mm
00000001 0.847 mm
00000010 1.694 mm
00100100 30.492 mm
(MFX-1700/MFX-1600)
00110000 40.656 mm
(MFX-1300/MFX-1200)
11111110 215.138 mm
11111111 215.985 mm
Initial setting
Initial setting
Initial setting
Initial setting