Muratec MFX-1300 Field Engineering Manual page 165
Facsimile system
Hide thumbs
Also See for MFX-1300:
- Quick reference (20 pages) ,
- Specifications (2 pages) ,
- Features (2 pages)
Table of Contents
Advertisement
HIGH VOLTAGE POWER SUPPLY (HVPS)
1. Open the top cover.
2. Remove the FRONT COVER.
3. Disconnect the connector on the HVPS and remove five HVPS mounting screws, then remove the
HVPS.
CONNECT PRINTER PCB
1. Remove the REAR COVER.
2. Remove two PCB shield mounting screws, and then remove the PCB shield.
3. Disconnect all connectors on the CONNECT PRINTER PCB.
4. Remove three printer connect PCB mounting screws and the tab, and then remove the CONNECT
PRINTER PCB.
PCB shield
High voltage power supply
Printer connect PCB
5-17
Advertisement
Chapters
Table of Contents
