6.6 Attaching the 2-Bin tray
Packaging contents:
(1) 2-Bin unit (with connection cable) ....................................................................... 1
(2) Screws ................................................................................................................ 4
(3) Paper tray for the 2-Bin unit ................................................................................ 1
Installation
1. Remove the REAR COVER.
2. Remove the TOP LEFT COVER.
3. Remove the OPTION COVER A.
4. Remove the EXIT TRAY.
5. Remove the RX EXIT COVER.
6. Separate the RX EXIT COVER A and B.
7. Remove the PCB SHIELD. Do not need to remove the CONNECT PRINTER PCB.
Printer connect PCB
PCB shield
8. Attach the 2-Bin tray to the machine, while passing the connection harness through the machine frame.
9. Connect the connection harness to the connector P1314 on the CONNECT PRINTER PCB.
Note: The connection cable is not such long actually.
6-17