Printer Test - Muratec MFX-1300 Field Engineering Manual

3.10.2 Printer Test

The Printer Test mode offers seven different test patterns as shown below.
Pattern A
Pattern D
1. Press Program key, *, 9,
Pattern
2. Press One-touch A, B, C, D, E, F or G to select the desired pattern.
Pattern
** Printing
The selected pattern will print continuously.
Note: Press STOP to cancel the printing.
3. To select another pattern, repeat the step 2. Otherwise, proceed to step 4.
Or press STOP to exit the printer test mode.
4. Press STOP to return to standby.
Pattern B
Pattern E
, then press ENTER.
A
**
3-66
Pattern C
Pattern F Pattern G