Oce TCS400 User Manual page 62

[22] The Layout card
[22] The Layout card
[23] The Image card
[23] The Image card
Use the settings on the 'Original' card for the following:
Define all the settings that deal with the original
■
Define the 'Input mode'. (see 'Create and start a copy job' on page 64)
■
Define the size of the original
■
Remove a leading strip
■
Select the area of the original that you can see on the output.
■
Use the settings on the 'Output' card for the following:
Define all the settings that deal with the output media
■
Define the output media
■
Define the media width.
■
Define the copy length
■
Add a leading strip
■
Add a trailing strip.
■
Use the settings on the 'Layout' card for the following:
Define all the settings that deal with the layout changes
■
Define the scale factor.
■
Define the horizontal and the vertical alignment.
■
Shift the image.
■
Mirror the image.
■
62 Océ TCS400 User manual