Oce TCS400 User Manual page 173

If you do not want to load a new roll, use the upper right softkey to continue
the wizard at the introduction screen. If you do want to load a new roll, press
the retract button to change the media roll. (see figure 47)
When you press the retract button, the screen displays the message 'Load new
5
media'. Change the media roll as described in the above sections.
If you do not press the retract button and continue in the 'Change media type'
6
wizard, the screen displays the message 'Select roll to change media type for'.
Use the lower softkeys to select the correct roll to change the media type for.
[56] Select a roll to change the media type.
[56] Select a roll to change the media type.
Press the key for 'Next' to continue. The screen displays the message 'Change
7
media type of roll [number]'. Use the lower softkeys to select the correct media
type for the media roll.
[57] Select the correct media type for the roll
[57] Select the correct media type for the roll
Press the key for 'Finish' to confirm the settings and to exit the wizard.
8
Manage jobs on the Océ TCS400 173