Oce TCS400 User Manual page 171

How to select the settings for the new roll of media
Attention:
panel displays a wizard. Use the wizard to define the media type and the cut
option for the new media roll.
The screen displays the message 'Select media type on roll (number)'. Use the
1
lower softkeys to select the media type.
[52] Select the media type
[52] Select the media type
Press the key for 'Next' to enter the cut option screen. The system displays the
2
question 'Cut?'
Use the lower softkeys to select the cut option for the media.
3
[53] Select the cut option
[53] Select the cut option
Select one of the following:
'Yes, long strip'
■
Cut the media with a full roll rotation feed (20 inches) before the printer cuts
the media. You can use this option if the media is damaged or polluted with,
for example, tape residue.
'Yes, short strip'
■
Cut the media with the shortest possible strip (8 inches).
'No'
■
No media cut.
Press the key for 'Finish' to confirm the settings and to exit the wizard.
4
Manage jobs on the Océ TCS400
After you load a new roll of media, the screen of the printer operator
171