Oce TCS400 User Manual page 215

A calibration error
When calibrating the scanner, the following error message can appear:
If this error message appears, first update the IT8 file with the IT8 file that
matches the scanner calibration sheet, then calibrate the scanner.
(see 'Update the IT8 file for scanner calibration' on page 149)
(see 'Calibrate the scanner' on page 146)
Before you calibrate the scanner, always make sure you fulfill all requirements
described in the Calibrate the scanner section of chapter 7. If an error message
appears, follow the instructions on the screen.(see 'Calibrate the scanner' on
page 146)
Error handling 215