Oce TCS400 User Manual page 163

The screen displays the message 'Select roll for Feed & cut.' Use the lower
4
softkeys to select a media roll to clean cut.
Press the key for 'Next' to continue. The screen displays the message 'Cut?'
5
Use the lower softkeys to select the cut length option. Select one of the
6
following:
'Yes, long strip'
■
Feeds the media with a full roll rotation feed (20 inches) before the printer
cuts the media.
'Yes, short strip'
■
The printer automatically cuts the media with the least possible media waste
(8 inches).
Press the key for 'Finish' to confirm the settings. The screen displays the
7
message 'Cutting sheet...'.
After the sheet is cut, you automatically exit the wizard.
Manage jobs on the Océ TCS400 163