Oce TCS400 User Manual page 159

How to adjust the pressure platen to the thickness of your original
Open the scanner cover to expose the pressure platen.
1
Use one hand to press down on the platen.
2
Put two fingers in the recesses in the front of the slider. Adjust the slider to the
3
thickness of the original.
[45] Put two fingers in the recesses in the front of the slider
[45] Put two fingers in the recesses in the front of the slider
Use the measurement scale on top of the slider to adjust the slider to the
thickness of the original.
[46] The measurement scale on top of the slider
[46] The measurement scale on top of the slider
Manage jobs on the Océ TCS400 159