Oce TCS400 User Manual page 244

The toolbar
[41] The toolbar buttons
Button
'Hold'
'Resume'
'Move to top'
'Delete'
'Properties'
'Print'
[41] The toolbar buttons
The status bar
The status bar at the bottom of the Océ Queue Manager displays the following:
The system status (connected or disconnected).
■
The system name ('localhost' if you work on the Océ Power Logic
■
controller).
The job status (for example 'Printing').
■
The user mode ('Key operator', 'Repro operator', 'System administrator',
■
'Service operator' or 'Anonymous').
The window for the print queue
The print queue window in the left-hand pane contains two sections.
The top section above the separation line shows the job that is printed.
■
The bottom section under the separation line shows the jobs that wait to be
■
printed. The window displays the jobs in the order in which the jobs are
received.
244 Océ TCS400 User manual
Function
Place a job on hold in the print queue .
Continue a job that was placed on hold.
Move a job to the top of the print queue, to give the job
priority.
Delete a job from the print queue.
View the properties of a selected job.
Print a job from the print queue.
®