Oce TCS400 User Manual page 211

Temperature or humidity out of range
The system produces a short interrupted audio signal. The red LEDs on the
printer operator panel flash two times. Press the key for 'OK'. The system
information card on the on-line screen of the printer operator panel displays the
following message until the problem is solved:
If this error persists, contact your local Océ service organization.
Clear the set memory
Attention:
Clear the set memory when the Océ Queue Manager contains damaged jobs
that you cannot delete.
You can clear the set memory from the Océ System Control Panel.
From the 'System' menu, select 'Clear the system' to delete all the jobs on the
system.
If you do not have a keyboard, mouse and monitor with your controller, you
can also clear the system with the 'Configure system' wizard on the printer. (see
'Configure the network settings of the Océ TCS400' on page 49).
Error handling
When you clear the set memory, all jobs on the system are deleted.
211