Oce TCS400 User Manual page 139

Problem
The colored lines
are not well
aligned or
blurred
Missing sections
in lines or
stepped lines
Missing parts of
characters
Ink saturation
causes the media
to cockle
Ensure the best quality output
Method of Solutions
analysis
■
Quality check
■
print
■
■
■
Quality check
■
print
■
■
■
Quality check
■
print
■
■
Demo print
■
■
■
■
■
Use the 'Lines & text' content mode
Use the 'Presentation' quality mode
Use the 'Optimize print quality'
wizard to correct the problem.
If failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing
printheads (see 'Replace a defective
printhead' on page 186).
Use the 'Lines & text' content mode
Use the 'Presentation' quality mode
Use the 'Optimize print quality'
wizard to correct the problem.
If failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing
printheads.
Use the 'Lines & text' content mode
Use the 'Presentation' quality mode
Use the 'Optimize print quality'
wizard to correct the problem.
Use the 'Area fills' content mode
The media type defined on the printer
must be the same as the media
available on the printer. If the media
type defined on the printer is not the
same as the media available on the
printer, use the 'Change media type'
wizard to change the media type
Use coated media.
Use the default drying time.
Use the setting KO - Printer -
Climate dependent alignment to
define if the system must
automatically do an alignment when a
large change in climate occurs.
Remove the printer from areas of high
humidity.
139