Oce TCS400 User Manual page 34

When you select the 'Entry to the scan-to-file settings', the screen displays the
scan-to-file settings with the default values defined in the Océ Settings Editor.
(see 'Define the copy settings on the scanner operator panel' on page 61)
[14] The Home screen
[14] The Home screen
The home screen also gives access to the system settings. Use the softkey
above the 'System' card to access the following:
The language settings.
■
The language settings include the first and the second language defined in
the Océ Settings Editor.
The original handling settings.
■
The original handling settings include the original release modes and the
auto feed settings.
'Deskew'
■
When this setting is enabled , the scanner automatically corrects the angle
of a slightly skewed image. The 'Deskew' setting operates only when the
'Size' setting on the 'Original' card is set to 'Automatic'. (see 'Define the size
of the originals' on page 66)(see 'Define the size of the originals' on
page 85)
The scanner calibration wizards.
■
[15] The System screen
[15] The System screen
If an error occurs on the scanner, the screen displays an error recovery screen.
The error recovery screen fills the complete screen.
34 Océ TCS400 User manual