Oce TCS400 User Manual page 193

How to remove the maintenance cassette
Attention:
You can seriously damage the printheads. If you open the maintenance door
outside the wizard, an error message prompts you to close the door.
Press the on-line / off-line key on the printer operator panel to take the printer
1
off-line.
If you replace the cassette as the result of the message ' Maintenance cassette
full. Press Continue to enter the Replace cassette wizard.', press the softkey for
'Continue' to enter the 'Replace cassette.' wizard. Then continue with step 4.
Use the upper softkeys to scroll to the 'Replace cassette' card.
2
Press the softkey below the 'Replace cassette' card to enter the wizard.
3
An introduction screen displays the message 'Use this wizard to replace the
maintenance cassette.'
Maintenance
Do not remove the maintenance cassette if you are not in the wizard.
193