Oce TCS400 User Manual page 198

How to clean the scan area
Attention:
chemicals: Do not spray liquids directly on the scanner.
Turn off the scanner and disconnect the power plug.
1
Open the scanner cover to expose the pressure platen.
2
Remove the pressure platen.
3
Use one hand to press down on the platen.
Put two fingers in the openings on the front of the slider. Move the slider
toward the center until the pressure platen disengages.
[60] Use one hand to press down on the platen. Put two fingers in the openings on the front of the slider. Move the slider toward the center until the pressure platen disengages
[60] Use one hand to press down on the platen. Put two fingers in the openings on the front of
the slider. Move the slider toward the center until the pressure platen disengages
198 Océ TCS400 User manual
Do not use abrasives, acetone, benzene or fluids that contain these