Oce TCS400 User Manual page 248

How to print a number of sets of a job from the history queue
Log on as a key operator or as a system administrator.
1
Select the job in the history queue.
2
Open the 'Job properties' dialog box.
3
Use one of the following methods to open the 'Job properties' dialog box:
From the 'Job' menu, select 'Properties' or,
■
Click the 'Properties' button on the toolbar or,
■
Right-click the job and select 'Properties'.
■
Select the 'Settings' tab in the 'Job properties' dialog box.
4
Change the number of sets in the 'Sets' field.
5
Print the job as described in the paragraph above.
6
The system prints the indicated number of sets.
How to cancel jobs from the Océ Queue Manager
Attention:
Select the jobs in the print queue, the history queue, or the inbox queue.
1
From the 'Job' menu, select 'Delete', or click the 'Delete' button on the toolbar.
2
A cross icon indicates the deleted job.
The system does not print the canceled job.
You can select more than one job with the mouse and the shift or control key.
An anonymous user cannot cancel a job from a remote system.
Note:
How to cancel active print jobs from the Océ Queue Manager
Attention:
Select the active job in the print queue.
1
From the 'Job' menu, select 'Delete', or click the 'Delete' button on the toolbar.
2
The printer stops the printing immediately.
If the controller was still processing part of the job, the controller flushes the
job.
An anonymous user cannot cancel a job from a remote system.
Note:
248 Océ TCS400 User manual
You can never undo this action.
You can never undo this action.