Oce TCS400 User Manual page 50

How to configure the system from the printer operator panel
Press the on-line / off-line key to set the printer off-line (see 'The on-line mode
1
and the off-line mode' on page 27).
Use the upper softkeys to scroll to the 'Configure system' card.
2
Press the softkey below the 'Configure system' card to enter the wizard.
3
The screen displays the message 'Use this wizard to configure the system.'
Press the key for 'Next'.
4
The screen displays the message 'Select item.'
Use the lower softkeys to select 'Network settings adapter [number]'.
5
Press the key for 'Next'.
6
The screen displays 'Use DHCP server for adapter [number]?'. Use the lower
7
softkeys to select 'Yes' or 'No'.
50 Océ TCS400 User manual