Oce TCS400 User Manual page 102

The 'Destination properties' dialog box opens.
[31] The Destination properties dialog box
[31] The Destination properties dialog box
Enter a name for the destination in the 'Name' text box.
3
This name will appear on the scanner panel.
From the 'Type' drop-down list box, select 'On the controller'.
4
Enter a path of the target folder in the 'Path' text box.
5
You can also click the 'Browse' button to select the path.
Click 'OK' to accept the destination properties.
6
Create a network destination with SMB
Create a shared folder on a workstation. For example c:\Scan.
1
From the 'File' menu on the Océ Scan Manager, select 'New'.
2
You can also click the 'New' button on the toolbar.
The 'Destination properties' dialog box opens.
From the 'Type' drop-down list box, select 'SMB'.
3
Enter the system name of the workstation where you created the shared folder
4
in the 'System' text box.
Find the system name of the workstation on the control panel of the
Note:
workstation (Control panel - Network - Identification - System name)
102 Océ TCS400 User manual