The on-line mode
When the printer is in the on-line mode, the green LED is on. The screen of the
printer operator panel displays the following five information cards.
[1] On-line mode - Information cards
Information card
Job information
Media information
Ink level information
Printhead information
System information
[1] On-line mode - Information cards
28
Océ TCS400 User manual
Displayed information
Job status
■
Job name
■
Progress indication
■
Selected print mode.
■
The media types loaded on the system .
The ink level of each ink tank. There are four
indication types.
Percentage of ink in a tank (1% - 100%).
■
'Ink tank empty' (0%). The indication for the
■
empty tank blinks.
The ink tank is not in place. The indication
■
shows a dashed rectangle.
Possible obstruction of ink path. (see
■
'Miscellaneous errors' on page 208)
The status of each printhead. There are three
status types.
All printheads OK
■
Defective printheads
■
During the last check in the 'Optimize print
quality' wizard, failed nozzles were detected.
The printer can continue to print. Use the
'Optimize print quality' to check for failed
nozzles and to recover the failed nozzles. The
last time the printheads were checked is
displayed on the lower left corner off the
screen. (see 'Use the Optimize print quality
wizard' on page 141).
Error messages and warnings about the
■
maintenance cassette.
Make a demo print
■
Change the language.
■