Oce TCS400 User Manual page 310

Features
The EPA E
Sleep mode
■
The power use of some functions is automatically decreased to save energy.
The printer enters the sleep mode 30 minutes after the last print job is
completed. The key operator can adjust this default time within a range
between 30 and 240 minutes.
It is suggested that you determine the appropriate default time for your work
pattern by changing the setting in increments of 30 minutes and testing each
setting for at least a week. If, due to your usage pattern, a 240 minute limit
still causes sizable inconvenience, the key operator can disable the sleep
mode.
E
NERGY
310 Océ TCS400 User manual
®
S Criteria for printers involves the following feature.
NERGY TAR
®
S is a U.S. registered mark.
TAR