Data Memory For Calibration And Calibration Test - A&D GF-30K Instruction Manual

12-3. Data Memory for Calibration and Calibration Test

Calibration data (when and how it is performed) and calibration test
data can be stored in memory.
All the data in memory is available to be output at one time to a
printer or personal computer.
Up to 50 data sets of the latest calibration or calibration test can be
stored. When the memory capacity has been reached, "
illuminates in the upper left of the display as shown at the right.
Storing the calibration and calibration test data
Clr
Note If " " appears blinking in the upper left of the display, delete the data in memory.
Store the calibration and calibration test data as follows:
Step 1 Set the "Data memory (
Step 2 Set the "GLP output (
Step 3 With the settings above, each time calibration or calibration test is performed, the
data is stored automatically.
Transmitting the memory data
Note
Confirm that the "Serial interface (
Refer to "10. Function Table" and "16-2. Connection To Peripheral Equipment".
Confirm that the "Data memory (
Step 1 Press and hold the
then release the key.
Step 2 Press the
Step 3 Press the
Step 4 Press the
Step 5 The balance displays
key to return to the weighing mode.
Deleting data stored in memory
Step 1 Press and hold the
then release the key.
Step 2 Press the
Step 3 Press the
Step 4 Press the
Step 5 Press the
Step 6 The balance displays
key to return to the weighing mode.
)" parameter to "
data
)" parameter to "
info
5if
data
key until
PRINT
key to display
PRINT
key to display
RE-ZERO
key to transmit all memory data using the RS-232C interface.
PRINT
Clear
key until
PRINT
key to display
SAMPLE
key to display
PRINT
key to display
RE-ZERO
key to delete all data.
PRINT
when all the data has been deleted. Press the
out
".
3
" or "
1 2
)" parameters are set properly.
)" parameter is set to "
is displayed,
out
with "no" blinking.
out " n " o
with "go" blinking.
out " g " o
when all memory data is output. Press the
is displayed,
out
.
Clear
with "no" blinking.
Clr " n " o
with "go" blinking.
Clr " g " o
60
Indicator
"
fUl
".
3
".
In the upper left
of the display
In the upper left
of the display
CAL
CAL