A&D GF-30K Instruction Manual page 71

12-6-2. Recalling the tare value (Quick selection mode)
The procedure below describes an easy way to recall the tare value to be used for weighing.
When the recalled tare value is to be changed, refer to "12-6-1. Storing the tare value".
Step 1 Set the "Data memory (
Step 2 Press the
recalling mode. The tare value last selected
with its tare number appears. The display is
as shown to the right, with all the digits
blinking.
Step 3 Press the
Each time the
displayed value changes as follows:
( ..... ↔
t03
Step 4 Press the
The balance returns to the weighing mode with
the selected tare value ready for use.
To cancel the selection, press the
The balance returns to the weighing mode.
Note
When no operation is performed in step 4 (after a few seconds of inactivity), the
balance selects the value currently displayed and returns to the weighing mode
automatically.
Canceling the tare value data
Cancel the tare value data as follows:
Step 1 Remove everything from the weighing pan
and press the
tare value.
)" parameter to "
data
key to enter the tare value
MODE
key to select the value.
MODE
key is pressed, the
MODE
↔ ........ ↔
↔
t04 t20
key to confirm the selection.
PRINT
key to cancel the
RE-ZERO
".
5
Tare number
↔ ... )
↔
t01
key.
CAL
69
Tare value
Tare value
to be used
Weighing is performed
with the setting in
t04
ready for use.
Tare number
Tare value to
be canceled.