Glp Report - A&D GF-30K Instruction Manual

11-2. GLP Report

Set the following parameters to output the report.
To print the report, set the "GLP output (
AD-8121B. Refer to "16-2. Connection to the AD-8121B Printer" for details on using the
printer.
To output the report to a personal computer using the RS-232C interface, set the "GLP
output ( )" parameter to "
info
If the time and date are not correct, set the correct time and date in "Clock (
function table.
Notes
For operational details about calibration and calibration test, refer to "8. Calibration".
The GF-K series does not output time and date to the general format.
Calibration report using the internal mass
Setting of "info 1"
AD-8121 printer format
===========A=&=D
MODEL=====GX-30K
S/N=====01234567
ID=======ABCDEFG
DATE
======2004/12/31
TIME
========12:34:56
CALIBRATED(INT.)
SIGNATURE
- - - - - - - -
Space, ASCII 20h
Terminator, CR , LF or CR
<TERM>
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
)" parameter to "
info
".
2
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration type
Signature
53
" and use MODE 3 of the
1
Setting of "info 2"
General format
~~~~~~~~~~~A~&~D<TERM>
MODEL~~~~~GX-30K<TERM>
S/N~~~~~01234567<TERM>
ID~~~~~~~ABCDEFG<TERM>
DATE<TERM>
~~~~~~2004/12/31<TERM>
TIME<TERM>
~~~~~~~~12:34:56<TERM>
CALIBRATED(INT.)<TERM>
SIGNATURE<TERM>
<TERM>
<TERM>
----------------<TERM>
<TERM>
<TERM>
)" of the
Cl adj