A&D GF-30K Instruction Manual page 57

Title block and end block
When weight values are recorded as GLP data, a "Title block" is inserted at the beginning
and an "End block" is inserted at the end of a group of weight values in the GLP report.
Notes
To output the report to an AD-8121B , use MODE 3 of the AD-8121B.
If the data memory function is used, the "Title block" and "End block" can not be output.
Operation
Step 1 With the weighing data displayed, press and hold the
is displayed, then release the key. The "Title block" is output.
Step 2 The weighing data is output according to the parameter setting of the data output
mode (
prt
Step 3 Press and hold the
The "End block" is output.
Setting of "info 1"
AD-8121 printer format
-----------A-&-D
MODEL-----GX-30K
S/N-----01234567
ID-------ABCDEFG
DATE--2004/12/31
START
TIME----09:30:00
WT---+12345.6--g
WT---+12346.1--g
WT---+12346.2--g
WT---+12346.3--g
WT---+12345.1--g
WT---+12345.3--g
WT---+12347.1--g
WT---+12346.4--g
END
TIME----10:40:15
SIGNATURE
---------------
Space, ASCII 20h
Terminator, CR , LF or CR
<TERM>
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
) of the function table.
key until
PRINT
Title block
Manufacturer
Serial number
ID number
Weighing data
Signature
End block
is displayed, then release the key.
recend
Setting of "info 2"
General format
Model
Date
Time
Time
55
key, until
PRINT
~~~~~~~~~~~A~&~D<TERM>
MODEL~~~~~GX-30K<TERM>
S/N~~~~~01234567<TERM>
ID~~~~~~~ABCDEFG<TERM>
DATE<TERM>
~~~~~~2004/12/31<TERM>
START<TERM>
TIME<TERM>
~~~~~~~~09:30:00<TERM>
<TERM>
WT~~~+12345.6~~g<TERM>
WT~~~+12346.1~~g<TERM>
WT~~~+12346.2~~g
WT~~~+12346.3~~g
WT~~~+12345.1~~g<TERM>
WT~~~+12345.3~~g<TERM>
WT~~~+12347.1~~g<TERM>
WT~~~+12346.4~~g<TERM>
<TERM>
END<TERM>
TIME<TERM>
~~~~~~~~10:40:15<TERM>
SIGNATURE<TERM>
<TERM>
<TERM>
----------------<TERM>
<TERM>
<TERM>
5tart