A&D GF-30K Instruction Manual page 61

Recalling the memory data
Confirm that the "Data memory (
Step 1 Press and hold the
then release the key.
Step 2 Press the
type of data appears in the upper left of the display as shown to
the right. Recall the data in memory using the following keys.
RE-ZERO
key ...... To go back to the previous data set.
MODE
key ...... To transmit the current data using the RS-232C interface.
PRINT
With
SAMPLE
key ......... To exit the memory recall mode.
CAL
Step 3 Press the
Transmitting all memory data at one time
Confirm that the "Serial interface (
Refer to "10. Function Table" and "16-2. Connection To Peripheral
Equipment".
Step 1 Press and hold the
then release the key.
Step 2 Press the
Step 3 Press the
Step 5 Press the
Step 6 Press the
Step 7 The balance displays
Press the
Deleting all memory data at one time
Step 1 Press and hold the
Step 2 Press the
Step 3 Press the
Step 4 Press the
Step 5 Press the
Step 6 The balance displays
The balance displays
Step 7 Press the
data
key until
PRINT
key to enter the memory recall mode. The
PRINT
key .. To proceed to the next data set.
held down, press the
To delete the current data.
Note Deleting the data will not increase the number of data that can be stored.
key to return to the weighing mode.
CAL
5if
key until
PRINT
key to display
SAMPLE
key to display
PRINT
key to display
RE-ZERO
key to transmit all data using the RS-232C interface.
PRINT
Clear
key to return to the weighing mode.
CAL
key until
PRINT
key several times to display
SAMPLE
key to display
PRINT
key to display
RE-ZERO
key to delete all data
PRINT
end
reCall
key to return to the weighing mode.
CAL
)" parameter is set to "
is displayed,
reCall
key
CAL
)" parameters are set properly.
is displayed,
reCall
.
out
with "no" blinking.
out " n " o
with "go" blinking.
out " g " o
when all data is transmitted.
is displayed, then release the key.
reCall
with "no" blinking.
Clr " n " o
with "go" blinking.
Clr " g " o
when all data is deleted.
.
59
Indicators
".
2
Weighing data
without time and date
Weighing data with
time and date
Indicators
Weighing data
without time and date
Weighing data with
time and date
.
Clear