Description Of The Item "Data Format - A&D GF-30K Instruction Manual

Interval memory mode
The weighing data is periodically stored in memory.
Example
Required setting
Optional setting

10-5. Description Of The Item "Data Format"

A&D standard format
This format is used when the peripheral equipment can receive the A&D format.
If an AD-8121B is used, set the printer to MODE 1 or 2.
This format consists of fifteen characters excluding the terminator.
A header of two characters indicates the balance condition.
The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus
sign is applied.
The unit, consisting of three characters, follows the data.
Header
Stable header
Unstable header
Overload header
DP (Dump print) format 5if type 1
This format is used when the peripheral equipment can not receive the A&D format.
If an AD-8121B is used, set the printer to MODE 3.
This format consists of sixteen characters excluding the terminator.
A header of two characters indicates the balance condition. No overload header is used.
The polarity sign is placed before the data, with spaces in place of leading zeros, if the data
is not zero or overloaded.
The unit, consisting of three characters, follows the data.
Header
Stable header
Unstable header
For periodical weighing without a personal computer command and
to output all of the data, to a computer, at one time.
The GX-K series can use time and date with "Time/Date output (
dout prt 3
dout data 2
dout int
, , or
dout 5-td1 2
5if type 0
Data Unit
Stable header of counting mode
Data Unit
Stable header of counting mode
Interval memory mode
Data memory function is used
Interval time
Adds the time and date.
3
Terminator
Terminator
40
)".
5-td