Details Of The Function Table - A&D GF-30K Instruction Manual

10-2. Details Of The Function Table

Class Item and Parameter
Cond
Condition
5t-b
Stability band width
Hold
Hold function
trc
Zero tracking
ba5fnc
5pd
Environment
Display refresh rate
Display
pnt
Decimal point
p-on
Auto display-ON
poff
Auto display-OFF
g5i
Capacity indicator
add
Accumulation function
rng
Display at start
Cl adj
Refer to "10-7. Clock and Calendar Function"
Clock
Cp
Comparator mode
Cp in
Data input method
Cp-r
Cp fnc
Comparison results
Comparator
Cp-b
Main display comparison
bep
Displayed
LO buzzer
only when
Comparator
bep
output
OK buzzer
(GX-04K) is
installed bep
HI buzzer
: Functions for GX-K series.
0
Fast response, sensitive value
1
2
Slow response, stable value
0
Stable when within ±1 digit
1
2
Stable when within ±3 digits
0
OFF
1
ON
0
OFF
1
Normal
2
Strong
3
Very strong
0
5 times/second
1
10 times/second
0
Point (.)
1
Comma (,)
0
OFF
1
ON
0
OFF
1
ON (10 minutes)
0
OFF
1
ON
0
OFF
1
ON
0
Does not display
1
Displays
0
No comparison
1
Comparison, excluding "near zero" when stable value or overloaded
2
Comparison, including "near zero" when stable value or overloaded
3
Continuous comparison, excluding "near zero"
4
Continuous comparison, including "near zero"
0
Set the upper lower limit value
1
Set the reference value
0
Not added
1
Added
0
OFF
1
ON
0
OFF
1
ON
0
OFF
1
ON
0
OFF
1
ON
: Factory settings. Digit is a unit of minimum weighing value.
34
Description
FAST
Can be changed by response
adjustment. With "Hold 1", sets the
MID.
averaging time.
SLOW
The stabilization indicator illuminates
with the display fluctuation within the
range. With "Hold 1", sets the stable
range.
Holds the display when stable in
animal mode. With "
turns on.
Keeps zero display by tracking zero
drift.
Period to refresh the display
Decimal point format
Turns on the weighing mode display
when the AC adapter is connected.
Turns off the display after 10
minutes of inactivity.
Capacity indicator.
Zero:
Maximum capacity: 100%
Displays and outputs the total value
of the weighing data.
Select whether or not to display the
smallest displayable weighing value
at weighing start.
Confirms and sets the time and
date. The time and date are added
to the output data.
Select Cp Hi or Cp lo.
Select Cp ref or Cp lmt.
Select whether or not to add the
comparison results to the output
data.
Displays the results on the main
portion of the display in place of the
weight value.
Select whether or not to sound the
LO buzzer.
Select whether or not to sound the
OK buzzer.
Select whether or not to sound the
HI buzzer.
",
Hold 1 ANIMAL
0%