A&D GF-30K Instruction Manual page 23

Using The Accumulation Function
Use the following keys to operate the accumulation function.
key .......... Displays the weighing data and the total value alternately each time it is
MODE
key ..... Sets the display to zero while the weighing data is displayed.
RE-ZERO
key .......... Outputs and adds the weighing data while the weighing data is displayed.
PRINT
Step 1 Press the
display.
Step 2 Place a sample on the pan. The weight
value is displayed.
Step 3 Press the
value is added to the total and is
output.
The accumulation number at the upper
left of the display increases by one.
Step 4 Repeat steps 1 to 3, when
accumulating more data.
Step 5 Press the
the total value.
Outputting the value
Step 6 Press the
total value.
Step 7 Press the
the total value.
Notes And Displaying Or Outputting An Overloaded Total
The output format depends on the function table setting.
While the accumulation function is in use, the data memory
function is not available.
To disable the accumulation function, set the
"Accumulation function (
When the "Data number output (
" ", the accumulation number will be output before the
1
weighing data.
pressed. While the accumulation function is in use, the unit can not be
changed.
Deletes the total value while the total value is displayed.
Outputs the total value while the total value is displayed.
key to zero the
RE-ZERO
key. The weight
PRINT
key to display
MODE
key to output the
PRINT
key to delete
RE-ZERO
)" parameter to "
add
)" parameter is set to
d-no
Accumulation
Accumulation
Output ST,+012345.6 g
Accumulation value
Output TOTAL(N=012)
ST,+012345.6 g
".
0
Output TOTAL(N=--)
OL,+9999999E+19 g
21
number
number
Data number is above 99
Accumulation data is
overloaded.