Configuring Switch Management Ip Address; Figure 21 Initial Setup Network Example: Port Vid - ZyXEL Communications ES-2024A User Manual

In the example network, configure 2 as the port VID on port 10 so that any untagged frames
received on that port get sent to VLAN 2.

Figure 21 Initial Setup Network Example: Port VID

1 Click Advanced
Applications and VLAN
in the navigation panel.
Then click the VLAN
Port Setting link.
2 Enter 2 in the PVID field
for port 10 and click
Apply to save the
settings.

5.1.3 Configuring Switch Management IP Address

The default management IP address of the switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an
example.
Chapter 5 Initial Setup Example
ES-2024A User's Guide
49