Adjusting The Picture Quality - Denon DVD-A1 Operating Instructions Manual

10

ADJUSTING THE PICTURE QUALITY

Press the PICTURE ADJUST button during
1
playback.
Use the and cursor buttons to select the
0 1
picture memory, then press the ENTER button.
• The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2
´ M3 ´ M4 ´ M5
2
STD (Factory default)
When this is selected, both the picture quality
and function are reset to normal.
M1 to M5
Picture quality settings you have adjusted can
be stored here.
Select the item to change using and
0
buttons.
ADJUST MODE
• The contrast , brightness , sharpness and
color (HUE) can be adjusted.
• Perform steps 4 and 5 to adjust the picture
3
quality (ADJUST MODE).
GAMMA (-6 ~ +6)
• Select this if dark portions of the picture are
too dark or bright portions are too bright.
• Perform steps 7 and 8 to adjust the gamma
correction (GAMMA).
Press the ª cursor button to select the adjust
mode, then use the and cursor buttons to
0 1
select the image quality adjustment item.
CONTRAST (-6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
4
Adjusts the picture's brightness.
SHARPNESS (-6 ~ +6)
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This
does not affect Progressive Scan images.)
STOP STILL / PAUSE PLAY
DISPLAY SUBTITLE AUDIO ANGLE
2, 3, 4, 5, 7, 8
TOP MENU
MENU
ENTER
2, 6, 9
RETURN
PICTURE PURE DIRECT
ADJUST MEMORY DIMMER ZOOM
1 1 2 3 PROG/DIR
4 5 6 CLEAR
7 8 9 CALL
PICTURE
ADJUST
Remote control unit
P I C TURE MODE
S TD M1 M2 M3 M4
Remote control unit
ENTER
Remote control unit
1
MEMORY 1 GAMMA
0 0 0
Remote control unit
MEMORY 1 GAMMA
CONTRAST
0 0 0
Remote control unit
Remote control unit
Use the • and ª cursor buttons to set the
5
adjustment value.
Press the ENTER button.
6
• All the adjustments are stored in the memory.
Use the and cursor buttons to select the
0 1
7
point to be set.
M5
Use the • and ª cursor buttons to adjust the
brightness level of the selected point.
(See "Reference" on page 26.)
• The level decreases (the picture gets darker)
when the ª cursor button is pressed and
increases (the picture gets brighter) when the
• cursor button is pressed.
8
• Values from 16 to 235 can be set. It is not
possible to set in such a way that the level of
0
dark sections exceeds that of bright sections.
NOTE:
When the CLEAR button is pressed during
gamma correction, all the setting points are set
back to the standard level.
Press the ENTER button.
9
• All the adjustments are stored in the memory.
To exit the picture adjust mode
Press the PICTURE ADJUST button.
0
ENGLISH
Remote control unit
ENTER
Remote control unit
MEMORY 1 GAMMA
235
Remote control unit
0
0 100
Remote control unit
ENTER
Remote control unit
25