Denon DVD-A1 Operating Instructions Manual page 7

(2) Connecting to a TV or Monitor Equipped with Color Component Input
Connectors
Color component output connectors (P
The red (P /C ), blue (P /C ) and brightness (Y) signals are output independently, achieving
R R B B
more faithful reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or
monitors (P , P and Y/R-Y, B-Y and Y/C
R B
operating instructions.
Connect in this way if your TV is compatible with Progressive Scan.
DVD-A1
AV1
L
R
AUDIO IN
NOTES:
• Use the three commercially available video cords to connect the DVD-A1's color component output
connectors to the TV or monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV
is PAL formated, set to PAL. (See page 15.)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated
only)
• To use with 2-channel audio output, set "2 CHANNEL" in "AUDIO CHANNEL" in "AUDIO SETUP" in
"SETUP" at the initial settings. (See page 16)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See page 15)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
/C , P /C and Y)
R R B B
, C and Y, etc.). For details, refer to the TV's
R B
To power outlet
TV
Y P /C P /C
R R B B
COMPONENT VIDEO IN
(3) Connecting to a TV with 21-pin SCART Terminal (For only European model)
• Use the commercially 21-pin SCART cable to connect the TV's 21-pin SCART terminal to the DVD-A1's 21-pin
SCART terminal (AV1).
DVD-A1
AV1
21-pin SCART terminal
• Some discs contain copy prohibit signals. If such
discs are played via a VCR, the copy prohibit
system may cause disturbance in the picture.
To power outlet
TV
NOTES:
• Set the "TV TYPE" in "VIDEO SETUP" in
"SETUP" to comply with your TV's video format.
When the TV is PAL formated, set to PAL. (See
page 15.)
ENGLISH
7