Using The Pure Direct Mode; Using The Dvd-A1 As A D/A Converter - Denon DVD-A1 Operating Instructions Manual

15

USING THE PURE DIRECT MODE

In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high
2
quality sound.
B
AL24 PLUS DVD AUDIO
POWER SOURCE
DVD
OPTICAL
COAXIAL
REMOTE SENSOR REMOTE SENSOR
Press the PURE DIRECT MEMORY button on the
remote control unit.
1
• The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
Use the • and ª cursor buttons to select the mode,
then press the ENTER button.
DIGITAL OUTPUT
ON: Digital audio signals are output.
OFF: Digital audio signals are not output.
2
VIDEO OUT
ON: Video signals are output.
OFF: Video signals are not output.
DISPLAY
ON: It is indicate in Display of the main unit.
OFF: It is not indicate in Display of the main unit.
Press the PURE DIRECT MEMORY button on the
3
remote control unit.
• All of the settings are stored in the memory.
Switch the PURE DIRECT switch on the main unit.
OFF: All signals are output normally.
MODE 1: The settings stored for MODE 1 are
used.
The factory default settings are:
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
4
"DISPLAY": "ON"
MODE 2: The settings stored for MODE 2 are
used.
The factory default settings are:
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
POWER POWER NTSC/ OPEN/
ON OFF PAL CLOSE
SKIP SLOW / SEARCH
STOP STILL / PAUSE PLAY
PLAY STOP
DISPLAY SUBTITLE AUDIO ANGLE
2 TOP MENU
MENU
PURE DIRECT
OPEN / CLOSE ENTER
OFF
MODE 1
2
MODE 2 RETURN
PICTURE PURE DIRECT DIMMER ZOOM
ADJUST MEMORY
1, 3
DVD AUDIO-VIDEO PLAYER DVD-A1
1 2 3 PROG/DIR
4 5 6 CLEAR
7 8 9 CALL
0 +10 SEARCH MODE MARKER
REPEAT A-B RANDOM V.S.S.
4
SETUP PAGE - PAGE +
REMOTE CONTROL UNIT
PURE D I RE CT MEMORY
SE TUP
PURE DIRECT
MEMORY PURE D I RE CT MODE
MODE 1
MODE 2
PURE D I RE CT MODE 1
D I G I TAL OUTPUT ON
V I DEO OUT ON
D I SPLAY ON
Remote control unit
SE L ECT : DEC I S I ON : ENTER BUT TON
PURE D I RECT MEMORY
SE TUP
PURE D I REC T MODE MODE 1
PURE D I REC T MODE 1
Remote control unit D I G I TAL OUTPUT ON
V I DEO OUT O F F
D I SP LAY
ENTER
SE L ECT : DEC I S I ON : ENTER BUT TON
Remote control unit
PURE DIRECT
MEMORY
Remote control unit
PURE DIRECT
OFF
MODE 1
MODE 2
Main unit
16

USING THE DVD-A1 AS A D/A CONVERTER

The DVD-A1 can be used as a D/A converter by connecting it to an external digital component using the
2
digital connectors.
B
AL24 PLUS DVD AUDIO
POWER SOURCE
DVD
OPTICAL
COAXIAL
REMOTE SENSOR REMOTE SENSOR
1
Set the source selector to either "OPTICAL" or
"COAXIAL".
• "– –" appears in the track number display section.
1
The sampling frequency of the external input signal is
then displayed. ("– –" is displayed if the sampling
frequency cannot be detected.)
NOTES:
• D/A conversion is only possible with 16- to 24-bit, 32 to 96 kHz PCM signal sources.
Dolby Digital and DTS etc. bitstream signals cannot be converted.
• When the source selector is set to "OPTICAL" or "COAXIAL", only the power button and the
OPEN/CLOSE button will work.
• The stop mode is set if the source selector is switched to "OPTICAL" or "COAXIAL" during playback.
• Noise will be output if the digital data of a CD-ROM, etc., is input.
• The digital data input from the digital input terminal is output from the digital output terminal as such.
(The data is output regardless of the "PURE DIRECT MODE" setting.)
ENGLISH
PLAY STOP
PURE DIRECT
OPEN / CLOSE
OFF
MODE 1
MODE 2
DVD AUDIO-VIDEO PLAYER DVD-A1
SOURCE
DVD
OPTICAL
COAXIAL
Main unit
29