Adjusting The Picture Quality - Denon DVD-2800 II Operating Instructions Manual

10 ADJUSTING THE PICTURE QUALITY

Press the DISPLAY button, use the • and ª cursor
buttons to select the "PICTURE MODE", then press
1
the ENTER button.
Use the • and ª cursor buttons to select the picture
memory, then press the ENTER button.
• The display switches as follows:
STANDARD Æ MEMORY 1 Æ MEMORY 2 Æ
MEMORY 3 Æ MEMORY 4 Æ MEMORY 5
2
STANDARD (Factory default)
When this is selected, both the picture quality and
function are reset to factory setting.
MEMORY 1 to MEMORY 5
Picture quality settings you have adjusted can be
stored here.
Select the item to change using • and ª buttons.
• CONTRAST, BRIGHTNESS, SHARPNESS, HUE
and GAMMA can be adjusted as you like.
CONTRAST (-6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
Adjusts the picture's brightness.
SHARPNESS (-6 ~ +6)
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This
does not affect Progressive Scan images.)
GAMMA (-6 ~ +6)
Select this if dark portions of the picture are too
dark or bright portions are too bright.
(This does not affect Interlaced images.)
3
• Black Level
To select the black level of the picture,
"LIGHTER" or "DARKER".
LIGHTER
The black level of the picture is selected to the
lighter one.
Select this setting normally when the player is
connected to a TV set through the VIDEO OUT
connector or S-VIDEO OUT connector. (Factory
preset)
DARKER
The black level of the picture is selected to the
darker one.
Select this setting normally when the player is
connected to a TV set through the COMPONENT
VIDEO OUT (Y, P B /C B , P R /C R ) connector.
DISPLAY
MENU
TOP MENU
ENTER
+
SKIP
-
RETURN
DISPLAY
Remote control unit
P I CTURE MODE
Remote control unit
ENTER
Remote control unit
MEMORY 1
CONTRAST
BRIGHTNESS
SHARPNESS
HUE
GAMMA
BLACK LEVEL
Remote control unit
1
SUBTITLE
1, 2, 3, 4
1, 2, 5
+
SLOW/SEARCH
-
ENTER
STANDARD
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
0
+ 8
- 2
0
0
LIGHTER DARKER
ENGLISH
23