Table of Contents
Advertisement
ENGINE INDICATION SYSTEM
2
3
FUEL CALCULATIONS
Fuel calculations do not use the aircraft fuel quantity indicators and are calculated from the last time
NOTE:
the fuel was reset.
Fuel used (GAL USED), endurance (ENDUR), and range (in nautical miles, RANGE NM) are calculated
based on the displayed fuel remaining (GAL REM) and the fuel flow totalizer. The calculated range also takes
into account the aircraft' s heading and the wind direction and speed. See the Flight Management Section for
information regarding the map feature related to the EIS Fuel Calculations.
Adjusting the fuel totalizer quantity:
On the Engine Page, use the DEC FUEL and INC FUEL softkeys to obtain the desired fuel remaining (GAL REM).
Resetting the fuel totalizer:
On the Engine Page, press the RST FUEL Softkey; this also resets the fuel remaining (GAL REM) to zero.
82
9
Figure 3-5 Engine Page (DA40F)
Calculated
Fuel Used
Calculated
Range
Figure 3-6 Fuel Calculations Group
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
8
7
Set Fuel
Remaining
Calculated
Endurance
6
5
4
190-00592-06 Rev. A
Advertisement
Table of Contents
