Map Panning - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star
Hide thumbs Also See for Diamond DA40:
Table of Contents

Advertisement

FLIGHT MANAGEMENT

MAP PANNING

Map panning allows the pilot to:
• View parts of the map outside the displayed range without adjusting the map range
• Highlight and select locations on the map
• Review information for a selected airport, NAVAID or user waypoint
• Designate locations for use in flight planning
• View airspace and airway information
When the panning function is selected by pressing the Joystick, the Map Pointer flashes on the map display.
A window also appears at the top of the map display showing the latitude/longitude position of the pointer,
the bearing and distance to the pointer from the aircraft' s present position, and the elevation of the land at the
position of the pointer.
Map Pointer Information
The map is normally centered on the aircraft's position. If the map has been panned and there has
NOTE:
been no pointer movement for about 60 seconds, the map reverts back to centered on the aircraft position
and the flashing pointer is removed.
138
Figure 5-8 Navigation Map - Map Pointer Activated
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Map Pointer
190-00592-06 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond da40fG1000

Table of Contents