Table of Contents
Advertisement
FLIGHT MANAGEMENT
If the parallel track proposed by the offset direction and distance is not allowed by the system, the activation
prompt is displayed, but disabled. Parallel Track cannot be activated if a course is set using direct-to or if the
active leg is the first leg of the departure procedure. Attempting to activate parallel track with these conditions
results in the message 'Parallel Track Unavailable Invalid Route Geometry'. If an approach leg is active the status
indicates that the system is unable to activate the parallel track with the message 'Parallel Track Unavailable
Approach Leg Active'. If the offset direction and distance results in an unreasonable route geometry the status
indicates that the system is unable to activate the parallel track because of invalid geometry.
If the active leg is not a track between two fixes (TF) or a course to a fix (DF) leg, the status
indicates that the system is unable to activate the parallel track because parallel track is not available for the
active leg type.
Cancel Prompt
216
Subdued Prompt
Unavailable Status
Invalid
Geometry
Figure 5-80 Parallel Track Unavailable
Active Status
Figure 5-81 Cancelling Parallel Track
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
(Unavailable)
Approach
Active
Offset Direction &
Distance Subdued
(Unavailable)
190-00592-06 Rev. A
Advertisement
Table of Contents
