Abnormal Operation; Svs Troubleshooting; Reversionary Mode - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star

Hide thumbs Also See for Diamond DA40:

Table of Contents

ADDITIONAL FEATURES

8.9 AbNORMAL OPERATION

SVS is intended to be used with traditional attitude, heading, obstacle, terrain, and traffic inputs. SVS is

disabled when valid attitude or heading data is not available for the display. In case of invalid SVS data, the PFD

display reverts to the standard blue-over-brown attitude display.

SVS becomes disabled without the following data resources:

• Attitude data

• Heading data

• GPS position data

• 9 Arc-second Terrain data

• Obstacle data

• TAWS function is not available, in test mode, or failed

• The position of the aircraft exceeds the range of the terrain database.

SVS can be displayed on the Multifunction Display (MFD) in Reversionary Mode. If it is enabled when switching

to Reversionary Mode, SVS will take up to 30 seconds to be displayed. The standard, non-SVS PFD display will

be shown in the interim.

Figure 8-81 SVS Reversionary Mode

Garmin G1000 Pilot's Guide for the Diamond DA40/40F

190-00592-06 Rev A

Diamond da40f G1000