Fuel Calculations - Garmin G2000 Cockpit Reference Manual

Engine Indication System

FUEL CALCULATIONS

NOTE: Fuel calculations do not use the aircraft fuel quantity indicators and
are calculated from the last time the fuel totalizer quantity was reset.
The system calculates Fuel used (GAL USED), endurance (ENDUR), and range
(RANGE NM) based on the displayed fuel remaining (GAL REM), fuel flow, and
groundspeed.
Adjusting the Totalizer-Based Fuel Remaining:
1) From the Home Screen on the Touchscreen Controller, touch Aircraft
Systems > Fuel Calc.
2) Touch the Gal Rem Button.
3) Enter the fuel quantity using the numeric keypad or large and small right
knobs, then touch the Enter Button. The totalizer-based fuel remaining is
set to the entered fuel quantity and the GAL USED is set to zero.
Setting the Totalizer-Based Fuel Remaining to Full Fuel:
1) From the Home Screen on the Touchscreen Controller, touch Aircraft
Systems > Fuel Calc.
2) Touch the Set To Full Fuel Button. The totalizer-based fuel remaining is
set to the aircraft's usable fuel capacity and the GAL USED is set to zero.
Fuel
Remaining
Fuel Used
Calculation
10
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Edit Remaining Fuel Set Fuel Quantity
Quantity
Fuel Calculations Screen
to Full
Range
Calculation
Endurance
Calculation
190-01264-01 Rev. A