Table of Contents
Advertisement
19) After passing OPSHN, the next leg of the arrival turns magenta as shown in Figure 5-134. The magenta arrow
in the flight plan list now indicates the OPSHN to FSHER leg of the arrival procedure is now active.
20) The flight continues through the arrival procedure to PYNON (see Figure 5-135). At a point 31 nm from the
destination airport, the phase of flight scaling for the CDI changes to Terminal Mode and is annunciated by
displaying 'TERM' on the HSI.
A descent to HABUK is in the next leg. Note the TOD point on the map. Annunciations for the upcoming turn
and descent, as well as the VDI and RVSI, appear on the PFD as the flight progresses.
190-00592-06 Rev. A
Figure 5-134 Tracking the OPSHN to FSHER Leg
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
FLIGHT MANAGEMENT
267
Advertisement
Table of Contents
