Table of Contents
Advertisement
FLIGHT MANAGEMENT
l) V4 is now loaded into the flight plan as shown in Figure 5-111.
5) Making V4 the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight ULNAZ. The TO waypoint of the leg is selected in order to activate the
leg.
c) Press the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-112. Note the TOP to
ULNAZ leg is actually part of V4.
252
Figure 5-111 V4 is Loaded in the Flight Plan
Figure 5-112 Comfirm Active Leg
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
190-00592-06 Rev. A
Advertisement
Table of Contents
