Table of Contents
Advertisement
SECTION 3 ENGINE INDICATION SYSTEM
The G1000 Engine Indication System (EIS) displays critical engine, electrical, fuel, and other system parameters
on the left side of the Multi Function Display (MFD) during normal operations (Figure 3-1). EIS information can
be fully expanded to an entire page (EIS - Engine Page) using the ENGINE Softkey. In Reversionary Mode, the
displays are re-configured to present Primary Flight Display (PFD) symbology together with the EIS.
EIS Display
Green bands on the instruments indicate normal ranges of operation; yellow and red bands indicate caution
and warning, respectively. White or uncolored bands indicate areas outside of normal operation not yet in the
caution or warning ranges. When unsafe operating conditions occur, the corresponding readouts flash to indicate
cautions and warnings. If sensory data to an instrument becomes invalid or unavailable, a red "X" is displayed
across the instrument.
190-00592-06 Rev. A
Figure 3-1 MFD (DA40)
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
ENGINE INDICATION SYSTEM
77
Advertisement
Table of Contents
