Garmin Diamond DA40 Pilot's Manual page 33

• INSET
OFF
DCLTR (3)
OFF
TRAFFIC (2) Displays/removes traffic information on Inset Map
TOPO
TERRAIN
STRMSCP
NEXRAD
XM LTNG
OFF
190-00592-06 Rev. A
INSET PFD OBS
Figure 1-16 Top Level PFD Softkeys
INSET
Displays Inset Map in PFD lower left corner
Removes Inset Map
Selects desired amount of map detail; cycles through declutter levels:
DCLTR TRAFFIC TOPO
DCLTR (No Declutter): All map features visible
DCLTR-1 DCLTR-1: Removes land data
TRFC-1
DCLTR-2: Removes land and SUA data
DCLTR-2 TRFC-2
DCLTR-3: Removes everything except active flight plan
DCLTR-3
TRFC-1: Displays traffic on Inset Map.
PFD
TRFC-2: Removes everything except traffic. Inset Map position HDG UP only.
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
Displays/removes terrain information on Inset Map
INSET PFD OBS
(optional)
Displays/removes Stormscope weather information on Inset Map (optional)
DFLTS WIND DME BRG1
Displays/removes NEXRAD weather and coverage information on Inset Map (optional)
Displays/removes XM lightning information on Inset Map (optional)
INSET
OPTN1 OPTN2 OPTN3
DCLTR TRAFFIC TOPO
DCLTR-1 TRFC-1
DCLTR-2 TRFC-2
DCLTR-3
Figure 1-17 INSET Softkeys
PFD
STBY ON ALT
(optional)
BRG1
DFLTS WIND DME
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
0 1 2 3
(optional)
CDI ADF/DME XPDR IDENT
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
(optional) (optional) (optional)
TERRAIN STRMSCP NEXRAD XM LTNG
(optional)
CDI ADF/DME XPDR IDENT
HSI FMT BRG2 ALT UNIT
Press the CDI Softkey to cycle through
navigation sources:
Press the BRG1/BRG2
- GPS
softkeys to display/remove
- NAV1 (VOR/LOC)
the Bearing Information
- NAV2 (VOR/LOC)
windows and cycle through
bearing sources:
- NAV1/NAV2
- GPS
- ADF
OFF
(optional) (optional) (optional)
TERRAIN STRMSCP NEXRAD XM LTNG
360 HSI ARC HSI
METERS IN HPA
XPDR
GND VFR CODE IDENT
HSI FMT BRG2 ALT UNIT
Press the BRG1/BRG2
softkeys to display/remove
the Bearing Information
4 5 6 7 IDENT
windows and cycle through
bearing sources:
SYSTEM OVERVIEW
TMR/REF NRST ALERTS
BACK ALERTS
Press the OFF or BACK Softkey
to return to the top-level softkeys.
TMR/REF NRST ALERTS
STD BARO BACK ALERTS
Press the STD BARO or BACK
Softkey to return to the top-level
softkeys.
BACK ALERTS
BACK ALERTS
BACK ALERTS
Press the OFF or BACK Softkey
to return to the top-level softkeys.
BACK ALERTS
BACK ALERTS
STD BARO BACK ALERTS
Press the BACK Softkey to
return to the top-level softkeys.
Press the STD BARO or BACK
Softkey to return to the top-level
softkeys.
BKSP BACK ALERTS
21