FLIGHT INSTRUMENTS
Changing temperature display units:
1) Select the AUX - System Setup Page on the MFD using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the TEMP field in the Display Units box.
4) Turn the small FMS Knob to highlight either CELSIUS or FAHRENHEIT and press the ENT Key to confirm the
selection.
5) To cancel the selection, press the FMS Knob or the CLR Key.
66
Figure 2-31 AUX - System Setup Page, Temperature Selection
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
190-00592-06 Rev. A