Table of Contents
Advertisement
View a destination airport:
From the Airport Information Page press the MENU Key. Select 'View Destination Airport'. The Destination
Airport is displayed.
The Airport Frequencies Box uses the descriptions and abbreviations listed in the following table:
A departure, arrival, or approach can be loaded using the softkeys on the Airport Information Page. See the
procedures section for details. METARs or TAFs applicable to the selected airport can be selected for display (see
the Hazard Avoidance section for details about weather.
The G1000 provides a NRST Softkey on the PFD, which gives the pilot quick access to nearest airport
information (very useful if an immediate need to land is required). The Nearest Airports Window displays a
list of the 25 nearest airports (three entries can be displayed at one time). If there are more than three they are
displayed in a scrollable list. If there are no nearest airports available, "NONE WITHIN 200NM" is displayed.
Airport Identifier/
COM Freq. Info.
- Identification
- Frequency
NRST Softkey
190-00592-06 Rev. A
Communication Frequencies
Approach *
Control
Arrival *
CTA *
ASOS
Departure *
ATIS
Gate
AWOS
Ground
Center
Helicopter
Class B *
Multicom
Class C *
Other
Clearance
* May include Additional Information
Table 5-5 Airport Frequency Abbreviations
Bearing/Distance to Airport
Type
Figure 5-33 Nearest Airports Window on PFD
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Navigation Frequencies
Pre-Taxi
ILS
Radar
LOC
Ramp
Terminal *
TMA *
Tower
TRSA *
Unicom
FLIGHT MANAGEMENT
Approach Available
Length of Longest
Runway
Additional Airports
(within 200 nm)
163
Advertisement
Table of Contents
