Garmin Diamond DA40 Pilot's Manual page 410

Integrated flight deck for da40 diamond star
Hide thumbs Also See for Diamond DA40:
Table of Contents

Advertisement

AUTOMATIC FLIGHT CONTROL SYSTEM
Support for WAAS precision approaches is available only in installations with GIA 63W IAUs when
NOTE:
WAAS is available.
Flying a RNAV GPS approach with vertical guidance:
1) Arm flight director modes for a RNAV GPS approach with vertical guidance:
a) Make sure the navigation source is set to GPS (use CDI Softkey to change navigation source).
b) Select the Runway 35R LPV approach for KCOS. Load and activate the approach into the flight plan.
2) Press the APR Key once clearance for approach has been received. GPS Approach Mode is activated and
Glidepath Mode is armed.
3) Once the glidepath is captured, Glidepath Mode becomes active. The flight director now provides guidance to
the missed approach point.
4) There are two options available at this point, as the autopilot flies the approach:
• Push the AP DISC Switch at the Decision
height and land the aircraft.
398
KCOS
4
CEGIX
3
2
FALUR
PYNON
Figure 7-38 LPV Approach to KCOS
Garmin G1000 Pilot's Guide for Diamond DA40/40F
• Use the GA Switch to execute a missed
approach.
HABUK
1
190-00592-06 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond da40fG1000

Table of Contents