Traffic Advisory System; Tas Symbology - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star
Hide thumbs Also See for Diamond DA40:
Table of Contents

Advertisement

HAZARD AVOIDANCE

6.7 TRAFFIC ADVISORY SYSTEM

TIS is disabled when Traffic Advisory System (TAS) is installed.
NOTE:
Refer to the Avidyne TAS600 Series Pilot' s Guide for a detailed discussion of the Avidyne TAS600.

TAS SYMbOLOGY

Traffic Advisory System (TAS) is designed to help in detection and avoidance of other aircraft. TAS uses an on-
board interrogator-processor and the Mode S transponder for the air-to-air traffic data link. Traffic is displayed
according to TCAS symbology using four different symbols.
A Non-threat Advisory, shown as an open white diamond, indicates that an intruding aircraft is at greater than
±1200 feet relative altitude or the distance is beyond 5 nm.
A Proximity Advisory indicates that the intruding aircraft is within ±1200 feet and is within 5 nm range, but
is still not considered a threat.
A Traffic Advisory (TA) alerts the crew to a potentially hazardous intruding aircraft. Closing rate, distance,
and vertical separation meet TA criteria. A Traffic Advisory that is beyond the selected display range is indicated
by a half TA symbol at the edge of the screen at the relative bearing of the intruder.
348
TAS Symbol
Table 6-17 TAS Symbol Description
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Description
Non-Threat Traffic
Proximity Advisory (PA)
Traffic Advisory (TA)
Traffic Advisory Off Scale
190-00592-06 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond da40fG1000

Table of Contents