Garmin Diamond DA40 Pilot's Manual page 294

Integrated flight deck for da40 diamond star

Hide thumbs Also See for Diamond DA40:

Table of Contents

HAZARD AVOIDANCE

Softkeys control the display of weather information on most MFD pages and the PFD Inset Map (Figure 6-3

shows the weather product softkeys for the Weather Data Link Page). When a weather product is selected

for display, the corresponding softkey label changes to gray to indicate the product is enabled. Unavailable

weather products have subdued softkey labels (softkeys are disabled from selection).

SFC Softkey label changes

to reflect current selection.

PREV and NEXT Softkeys cycle through Winds Aloft,

Icing, and Turbulence altitude selection softkeys.

The setup menus for the Navigation Map Page and the Weather Data Link Page control the map range settings

above which weather products data are decluttered from the display. If a map range larger than the weather

product map range setting is selected, the weather product data is removed from the map. The menus also

provide a means in addition to the softkeys for enabling/disabling display of weather products.

WIND/ICNG/TURB Softkey labels

change to reflect current selection.

Figure 6-3 Weather Data Link Weather Product Softkeys

Garmin G1000 Pilot's Guide for the Diamond DA40/40F

TURB OFF AIREPS

Select the BACK Softkey

to move up one level.

190-00592-06 Rev. A

Diamond da40f G1000