FIELD OF VIEW (SVS)
The map can display the boundaries of the PFD Synthetic Vision System (SVS) lateral field of view. The field
of view is shown as two dashed lines forming a V shape in front of the aircraft symbol on the map. This is only
available if SVS is installed on the aircraft.
Lateral Field
Displaying/removing the field of view:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'FIELD OF VIEW' field.
6) Select 'On' or 'Off'.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
190-00592-06 Rev. A
of View
Boundaries
Figure 5-29 Navigation Map - Field of View
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
FLIGHT MANAGEMENT
159