Displaying Ospfv3 Database Information - Dell PowerConnect B-RX Configuration Manual

Syntax: show ipv6 ospf area [<area-id>]
You can specify the <area-id> parameter in the following formats:
•
•
The <area-id> parameter restricts the display to the specified OSPF area
This display shows the following information.
TABLE 204
This field...
Area
Interface attached to this area
Number of Area scoped LSAs
SPF algorithm executed
SPF last updated
Current SPF node count
Router
Network
Indx
Area
Maximum hop count to nodes.

Displaying OSPFv3 database Information

You can display a summary of the Brocade device's link state database or detailed information
about a specified LSA type.
To display a summary of a device's link state database, enter the following command at any CLI
level.
BigIron RX# show ipv6 ospf database
Area ID
0
0
0
0
0
0
0
0
0
N/A
N/A
Syntax: show ipv6 ospf database [advrtr <ipv4-address> | as-external | extensive | inter-prefix |
BigIron RX Series Configuration Guide
53-1001810-01
As an IPv4 address, for example, 192.168.1.1
As a numerical value from 0 – 2,147,483,647
OSPFv3 area information fields
Type LS ID
Link 000001e6 223.223.223.223 800000ab 1547 8955
Link 000000d8 1.1.1.1
Link 00000185 223.223.223.223 800000ab 1481 7e6b
Iap 00000077 223.223.223.223 800000aa 1404 966a
Rtr 00000124 223.223.223.223 800000b0 1397 912c
Net 00000016 223.223.223.223 800000aa 1388 1b09
Iap 000001d1 223.223.223.223 800000bd 1379 a072
Iap 000000c3 1.1.1.1
Rtr 00000170 1.1.1.1
Extn 00000062 223.223.223.223 800000ae 1409 0ca7
Extn 0000021d 223.223.223.223 800000a8 1319 441e
inter-router | intra-prefix | link | link-id <number> | network | router [scope <area-id> |
as | link]]
Displays...
The area number.
The router interfaces attached to the area.
Number of LSAs with a scope of the specified area.
The number of times the OSPF Shortest Path First (SPF) algorithm is executed
within the area.
The interval in seconds that the SPF algorithm was last executed within the
area.
The current number of SPF nodes in the area.
Number of router LSAs in the area.
Number of network LSAs in the area.
The row number of the entry in the router's OSPF area table.
The area number.
The maximum number of hop counts to an SPF node within the area.
Adv Rtr
Displaying OSPFv3 information
Seq(Hex) Age Cksum
800000aa 1295 0639
800000ae 1325 e021
800000ad 1280 af8e
48
Len
68
68
56
56
40
32
72
52
40
32
32
1219